ekv www.vishay.com vishay roederstein revision: 14-mar-12 1 document number: 25145 for technical questions, contact: aluminumcaps 1@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 aluminum capacitors radial style features ? polarized aluminum electrolytic capacitor ? high ripple current ? high reliability ? high load life up to 10 000 h ? temperature range up to 105 c ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 applications ? for electronic lighting ballast ? power supply quick reference data description unit value nominal case size (? d x l) mm 10 x 12.5 to 18 x 31.5 rated capacitance range c r f 1.0 to 150 capacitance tolerance % 20 rated voltage range v 200 to 450 category temperature range c - 25 to 105 load life h 10 000 based on sectional sp ecification iec 60384-4/en130300 climatic category iec 60068 25/105/56 selection chart for c r , u r , and relevant nominal case sizes (? d x l in mm) c r (f) rated voltage (v) 200 250 350 400 450 1.0 ??? 10 x 12.5 - 2.2 ??? 10 x 12.5 10 x 16 3.3 ?? 10 x 12.5 ? 10 x 16 4.7 ??? 10 x 16 10 x 20 6.8 ? 10 x 12.5 ? 10 x 16 10 x 20 10 10 x 16 ?? 10 x 20 12.5 x 20 22 10 x 20 ? 12.5 x 20 12.5 x 25 16 x 25 33 ? 12.5 x 20 16 x 20 16 x 25 18 x 25 47 12.5 x 20 12.5 x 25 16 x 25 18 x 25 18 x 31.5 68 12.5 x 25 16 x 25 18 x 25 - - 100 16 x 25 18 x 25 - - - 150 18 x 25 - - - -
ekv www.vishay.com vishay roederstein revision: 14-mar-12 2 document number: 25145 for technical questions, contact: aluminumcaps 1@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 general note ? for minimum package quantity (mpq) and minimum order quantity (m oq) please refer to our price li st or contact customer service . ? for other packaging forms please refer to vishay roederstein general information. note ? unless otherwise specified, all electrical values apply at t amb = 20 c, p = 80 kpa to 120 kpa, rh = 45 % to 75 %. ordering example ekv 22 f/450 v, 20 %, size: 16 mm x 25 mm leads: long ordering code: malrekv00jg222p00k leads: short ordering code: malrekv05jg222p00k radial style: dimensions in millimeters ? d 5 6.3 8 10 12.5 16 18 22 25 s 2.0 2.5 3.5 5.0 5.0 7.5 7.5 10.0 12.5 ? d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 1.0 1.0 ? 1.5 2.0 ? 0.5 1.0 dimensions in millimeters and available forms l + max. ? d + max. ? d 0.05 tinned copper-ply steel s 0.5 15 min. 4 min. + - ca s ing in s ulation d max. l max. ? d 15 min. 4 min. ? d 18 long lead s malrekv00... l max. 4.5 0.5 s 0.5 d max. ? d 18 s hortened lead s malrekv05... ( s = 2 mm/2.5 mm/3.5 mm/5 mm/7.5 mm) electrical data symbol description u r rated voltage c r rated capacitance at 120 hz tan ? max. dissipation factor at 120 hz r esr max. equivalent series resistance at 120 hz i r rated alternating current (rms) at 120 hz and upper category temperature
ekv www.vishay.com vishay roederstein revision: 14-mar-12 3 document number: 25145 for technical questions, contact: aluminumcaps 1@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 electrical data and ordering information u r (v) c r 120 hz (f) dimensions ? d x l (mm) tan ? 120 hz r esr 120 hz ( ? ) i r 100 khz/105 c (ma) weight (g) catalog number (long leads) 200 10 10 x 16 0.15 19.9 250 2.3 malrekv00dd210s00k 22 10 x 20 0.15 9.04 500 2.8 malrekv00de222s00k 47 12.5 x 20 0.15 4.23 660 3.8 malrekv00fe247s00k 68 12.5 x 25 0.15 2.93 760 5.1 malrekv00fg268s00k 100 16 x 25 0.15 1.99 1120 7.1 malrekv00jg310s00k 150 18 x 25 0.15 1.33 1360 9.5 malrekv00kg315s00k 250 6.8 10 x 12.5 0.15 29.3 120 1.9 malrekv00dc168n00k 33 12.5 x 20 0.15 6.03 600 3.8 malrekv00fe233n00k 47 12.5 x 25 0.15 4.23 720 5.1 malrekv00fg247n00k 68 16 x 25 0.15 2.93 920 7.1 malrekv00jg268n00k 100 18 x 25 0.15 1.99 1200 9.5 malrekv00kg310n00k 350 3.3 10 x 12.5 0.20 80.4 100 1.9 malrekv00dc133o00k 22 12.5 x 20 0.20 12.1 350 3.8 malrekv00fe222o00k 33 16 x 20 0.20 8.04 500 6.3 malrekv00je233o00k 47 16 x 25 0.20 5.64 660 7.1 malrekv00jg247o00k 68 18 x 25 0.20 3.90 840 9.5 malrekv00kg268o00k 400 1.0 10 x 12.5 0.24 318 90 1.9 malrekv00dc110x00k 2.2 10 x 12.5 0.24 145 100 1.9 malrekv00dc122x00k 4.7 10 x 16 0.24 67.7 180 2.3 malrekv00dd147x00k 6.8 10 x 16 0.24 46.8 200 2.3 malrekv00dd168x00k 10 10 x 20 0.20 26.5 280 2.8 malrekv00de210x00k 22 12.5 x 25 0.20 12.1 430 5.1 malrekv00fg222x00k 33 16 x 25 0.20 8.04 640 7.1 malrekv00jg233x00k 47 18 x 25 0.20 5.64 840 9.5 malrekv00kg247x00k 450 2.2 10 x 16 0.24 145 120 2.3 malrekv00dd122p00k 3.3 10 x 16 0.24 96.5 140 2.3 malrekv00dd133p00k 4.7 10 x 20 0.24 67.7 180 2.8 malrekv00de147p00k 6.8 10 x 20 0.24 46.8 200 2.8 malrekv00de168p00k 10 12.5 x 20 0.20 26.5 320 3.8 malrekv00fe210p00k 22 16 x 25 0.20 12.1 560 7.1 malrekv00jg222p00k 33 18 x 25 0.20 8.04 700 9.5 malrekv00kg233p00k 47 18 x 31.5 0.20 5.64 880 12.0 malrekv00ks247p00k low temperature behaviour (at 120 hz) impedance ratio z (t2)/z (t1) rated voltage (v) t2/t1 200 250 350 400 450 - 25 c/+ 20 c 33466 additional electrical data parameter conditions value current leakage current (test conditions: u r , 20 c) after 5 min at u r i l5 ? 0.02 x c r x u r + 25 a resistance equivalent series resistance (esr) calculated from tan ? max. esr = tan ? /2 ? f c r
ekv www.vishay.com vishay roederstein revision: 14-mar-12 4 document number: 25145 for technical questions, contact: aluminumcaps 1@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 multiplier of ripple current (i r ) as a function of frequency frequency (hz) i r multiplier 1.0 f ~ 4.7 f 6.8 f ~ 150 f 60 0.25 0.35 120 0.30 0.50 300 0.45 0.60 1000 0.60 0.80 10 000 0.80 0.90 ? 100 000 1.00 1.00 test procedures and requirements test procedure (quick reference) requirements load life t amb = 105 c u r and i r applied after 5000 h ? 6.8 f after 10 000 h ? 10 f ? c/c: 20 % of initial value i l ? spec. limit tan ? ? 2 x spec. limit shelf life no voltage applied after 1000 h after test: u r to be app lied for 30 min 24 h to 48 h befo re measurement ? c/c: 20 % of initial value i l ? spec.limit tan ? ? 2 x spec. limit
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
